Land Rover in talks with Chery and Tianjin’s Tian Qi Auto for China JV

Gasgoo From China Car Times
Main productsLabels, high-temperature resistant materials (Kapton, Teflon), copper foil, aluminum foil, insulating materials (PET, PC), thermally conductive silicone, dust filter, speaker mesh (PC, nylon), filter non-woven fabric, waterproof breathable membrane, felt, non-woven bag, wiring harness tape (velour, cloth-backed), double-sided tape (3M, Crown, etc.), Rogers foam, silicone foam, aluminum foil, PE tube, motor acoustic foam, acoustic foam (single-component, dual-component, EVA foam, PE gasket, EPDM seal, FR4 (epoxy resin), PE foam gasket Acoustic and noise reduction, sealing and thermal insulation for vehicle interior and other areas: acoustic foam (single-component, sponge, foam (EVA, EPDM, silicone foam, PE, CR, NBR, etc.)), various brand foams (Rogers, Korean S&, Nitto, Saint-Gobain, etc.), felt, aerogel, butyl tape, and custom molding of various non-woven fabrics, custom molding of various tapes (3M, TESA, NITTO, Avery, etc.), waterproof and breathable protection for automotive lighting, water pump, motor, sensor, etc.: custom molding of waterproof breathable membrane (e-PTFE), D buffering and noise reduction for cables and window regulators: various seamed foam tubes, seamless foam tubes, PE tubes, aluminum foil tubes, etc., E applications for automotive wiring harness products: foam tubes, sponge tape, velour tape, cloth-backed tape, acetate cloth tape, velour sleeves, braided sleeves, etc., protection for displays, rearview mirrors, logos, high-gloss vehicle body surfaces, and production processes: various PE, PO, PET protective films and cutting, G other areas requiring: insulation (PET, PC, epoxy resin FR4, polyimide Kapton, etc.), conductivity (conductive fabric, copper foil, aluminum foil, conductive adhesive, conductive silicone, etc.), filtration (filter non-woven fabric, dust protection (dust filter, speaker mesh, non-woven fabric, etc.)), high-temperature resistance (Kapton, Teflon), heat dissipation (thermally conductive silicone, etc.), thermal insulation (high-performance thermal insulation film, insulation pad, etc.) and custom molding of such materials, H product and shipping identification (various roll labels, QR code labels, and high-temperature resistant labels)
Main productsautomotive electrical and electronic system components, automotive driveline components, automotive braking-system components, automotive steering-system components, automotive suspension-system components, automotive engine-system components

Land Rover are reportedly in talks with two companies within China to produce the Land Rover range vehicles for Chinese consumption. Land Rover sales in China have increased dramatically over the past 2 years, and by introducing Chinese made vehicles into China, they believe that they will be able to lower costs which would result in further sales.

Rumors of Land Rover entering China first came out earlier this year and were later confirmed by Tata’s Carl-Peter Forster. Land Rover are reportedly in talks with Chery Auto, and also a much smaller company named Tianjin Tian Qi Group. Chery’s CEO previously stated that Chery is not interested in working in a joint venture partnership with foreign car companies and plan on taking their own development road, although it could be that the allure of working with Land Rover has helped to soften his stance on joint venture partnerships. Tianjian Tian Qi Automotive Group is a very small company located in the city of Tianjin and is a small scale manufacturer of low cost MPV’s and SUV’s for the Chinese market.

We have learned that Land Rover will be aiming to produce around 40,000 vehicles in its first year of operation in China, and depending on the success of this. Its partner company, Jaguar are expected to enter the Chinese market also. The Tianjin Government are actively supporting Tian Qi Auto in the talks, and may offer substantial subsidies to Land Rover if they enter into a partnership with Tian Qi Auto as Tian Qi Auto is state owned and has seen its sales shrink over the past few years.

Land Rover entered China in 2003 and had yearly sales of just 23 units, but in the first half of 2010 sales had reached 10983 units which was an increase of 135% on the year before, and has put the Chinese market in third place behind the UK and USA for Land Rover Vehicles.

ForsterSupplier
Location: China/Jiangsu/Suzhou/Kunshan City
Main productsLabels, high-temperature resistant materials (Kapton, Teflon), copper foil, aluminum foil, insulating materials (PET, PC), thermally conductive silicone, dust filter, speaker mesh (PC, nylon), filter non-woven fabric, waterproof breathable membrane, felt, non-woven bag, wiring harness tape (velour, cloth-backed), double-sided tape (3M, Crown, etc.), Rogers foam, silicone foam, aluminum foil, PE tube, motor acoustic foam, acoustic foam (single-component, dual-component, EVA foam, PE gasket, EPDM seal, FR4 (epoxy resin), PE foam gasket Acoustic and noise reduction, sealing and thermal insulation for vehicle interior and other areas: acoustic foam (single-component, sponge, foam (EVA, EPDM, silicone foam, PE, CR, NBR, etc.)), various brand foams (Rogers, Korean S&, Nitto, Saint-Gobain, etc.), felt, aerogel, butyl tape, and custom molding of various non-woven fabrics, custom molding of various tapes (3M, TESA, NITTO, Avery, etc.), waterproof and breathable protection for automotive lighting, water pump, motor, sensor, etc.: custom molding of waterproof breathable membrane (e-PTFE), D buffering and noise reduction for cables and window regulators: various seamed foam tubes, seamless foam tubes, PE tubes, aluminum foil tubes, etc., E applications for automotive wiring harness products: foam tubes, sponge tape, velour tape, cloth-backed tape, acetate cloth tape, velour sleeves, braided sleeves, etc., protection for displays, rearview mirrors, logos, high-gloss vehicle body surfaces, and production processes: various PE, PO, PET protective films and cutting, G other areas requiring: insulation (PET, PC, epoxy resin FR4, polyimide Kapton, etc.), conductivity (conductive fabric, copper foil, aluminum foil, conductive adhesive, conductive silicone, etc.), filtration (filter non-woven fabric, dust protection (dust filter, speaker mesh, non-woven fabric, etc.)), high-temperature resistance (Kapton, Teflon), heat dissipation (thermally conductive silicone, etc.), thermal insulation (high-performance thermal insulation film, insulation pad, etc.) and custom molding of such materials, H product and shipping identification (various roll labels, QR code labels, and high-temperature resistant labels)
QI AutomotiveSupplierCompany Insights
Location: China/Shandong/Qingdao/Jiaozhou City
Main productsautomotive electrical and electronic system components, automotive driveline components, automotive braking-system components, automotive steering-system components, automotive suspension-system components, automotive engine-system components

Gasgoo not only offers timely news and profound insight about China auto industry, but also help with business connection and expansion for suppliers and purchasers via multiple channels and methods. Buyer service: buyer-support@gasgoo.com Seller Service: seller-support@gasgoo.com

All Rights Reserved. Do not reproduce, copy and use the editorial content without permission. Contact us: autonews@gasgoo.com

Related Documents(3)

Rankings of smart cockpit component suppliers in China (Jan.-Sept. 2026).7z
China Passenger Vehicle Export Rankings for Jan.-Sept. 2026.7z
Rankings of ADAS component suppliers in China (Jan. - Sept. 2026).7z