Gasgoo Munich- At the 2026 7th Next-Generation Powertrain Technology Innovation Summit, hosted by Gasgoo on November 20, Zhou Linke, Chief Application Specialist at IPRO, noted that as electric drive systems evolve toward higher power, faster speeds, and greater efficiency, the growing adoption of oil-cooled motors is making internal housing protection and pressure balancing critical to component durability — elevating the role of microporous membrane and filtration material solutions.

Zhou Linke, Chief Application Specialist at IPRO
Zhou pointed out that as electric drive power climbs, dust and moisture intrusion can trigger arcing, lubricant emulsification, and even bearing electrical corrosion. The electronic control unit, motor, and reducer must all meet high protection grades simultaneously — a single strength is no longer enough. At the same time, cooling oil viscosities keep dropping. After high-speed shearing, the resulting oily aerogel and fine oil droplets have smaller particle sizes that original filter layers struggle to intercept. Unfiltered oil mist adheres to and clogs breathable membranes, degrading airflow — which ultimately manifests as oil leaks, water ingress, and foreign particle intrusion.
According to the company, IPRO's oil filter valve features a two-stage design: a front oil-filter layer paired with an ePTFE waterproof breathable membrane. The filter cotton intercepts oil mist and liquid first, while the microporous membrane blocks liquid water and the cotton catches debris — all while maintaining pressure equilibrium between the inside and outside. The product is compatible with oil-cooled motors, oil-cooled reducers, differentials, and multi-in-one electric drive systems. Protection grades cover IP67, IP68, and IP69K, with the series offering a minimum airflow of 1,200–1,500 ml/min.
To address the durability challenges posed by low-viscosity oils, IPRO has rolled out its second-generation oil filter valve, upgrading both the structural design and the membrane and filter cotton materials to improve anti-clogging performance. Zhou said that in temperature-humidity cycling tests conducted by a Tier 1 supplier, multiple domestic and foreign oil filter valves failed within one to two weeks. Under the same conditions, the second-generation valve still maintained airflow in the hundreds of ml/min range after more than two months of testing. IPRO's flagship oil filter valve is already in mass production with two customers, with several more in trial phases. While current electric drive protection still relies primarily on one-way valves, Zhou said the second-generation filter valve — validated through durability testing — can technically serve as a replacement.









