Gasgoo Munich- On November 20, at the 7th Next-Generation Power Technology Innovation Summit 2026 in Shanghai, Li Rulong, Director of the New Energy Power Center at the Dongfeng Motor R&D Institute, presented the Mach Power full-scenario hybrid solution along with the company's pure-electric and charging infrastructure roadmap.

Li Rulong, Director of the New Energy Power Center at the Dongfeng Motor R&D Institute
Li expects small cars to remain predominantly pure-electric, while hybrids will retain a meaningful share in mid-to-large segments. According to his breakdown, hybrid models currently account for roughly 90% of M-Hero's lineup, about 60% at VOYAH, and just over 20% for eπ and other compact offerings. Mach Power already covers Dongfeng's proprietary-brand portfolio, and select joint-venture models are also adopting the powertrain system.
On the hybrid architecture front, off-road applications pair a 2.0T engine with the HD200 two-speed longitudinal AWD system, built on an 800V silicon carbide platform. The engine drives through two gears directly, while the rear electric motor also features two speeds, delivering a combined thermal efficiency of roughly 42% in the high-efficiency variant. Commercial and front-wheel-drive models, meanwhile, adopt a 1.5T P1+P3 setup with AI-based energy management that taps real-time map and traffic data.
For long-range AWD, Dongfeng is preparing a P2.5 single-motor on-demand AWD system. By using one motor for both generation and propulsion, the setup sheds 50 kg, cuts costs by about 30%, and reduces drag torque by 40%. The range-extender system uses an 800V direct-connected unit — eliminating the step-up mechanism — and achieves a peak oil-to-electricity conversion rate of 3.66 kWh/L, with engine-engagement noise kept under 1 dB(A).
On the pure-electric and charging side, Dongfeng will launch a kilovolt coaxial electric drive platform before year-end. Public specifications show the corresponding iD5-300SN product covering 450V to 1,000V, with 300 kW peak power and 1,500V-rated silicon carbide modules. A megawatt-class supercharging prototype rolled off the line in July. On the battery front, the integrated die-cast housing is formed by a 16,000-ton press, and solid-liquid hybrid batteries are set to begin small-batch vehicle validation.
Beyond automotive use, Dongfeng is pushing its powertrain technology into low-altitude aircraft. The company has already secured partial orders from aviation partners and plans to explore marine propulsion applications next.
Li also offered a contrarian take on the push for ever-longer electric range. A 500-km model typically packs a 70-to-80 kWh battery — remove the engine, and costs drop while range actually improves, he noted, questioning the socioeconomic rationale of oversized battery packs. Going forward, powertrain development will trend toward greater efficiency, integrated power-domain control, intelligent energy management, and diversification across land, sea, and air applications.









