Shanghai Jiao Tong University Team Advances Direct-Drive Steer-by-Wire Research, Explores Removing Steering Wheel-End Torque Sensor

Edited by Betty From Gasgoo

Gasgoo Munich- On Nov. 19, at the 2026 6th Automotive AI Intelligent Chassis Conference, Wu Xiaodong, a professor at the School of Mechanical Engineering at Shanghai Jiao Tong University, noted that as steer-by-wire enters mass production, steering systems need a hardware redesign tailored to the technology — not a simple carryover from traditional electric power steering (EPS) architectures.

19上海交大.jpg

On July 1, China's "Basic Requirements for Automotive Steering Systems" (GB 17675-2025) took effect, lifting the mandatory requirement for a mechanical connection in steering systems and paving the regulatory way for steer-by-wire mass production.

Wu explained that some current steer-by-wire systems still reuse the worm-gear reduction structure from traditional EPS. His team is researching a direct-drive architecture that connects the motor directly to the steering wheel, eliminating the impact of gear backlash and friction on road feel. They are also exploring the removal of the torsion-bar torque sensor at the steering wheel end to simplify the structure and cut costs. At the wheel end, the team is studying a coaxial motor setup to improve steering torque output and tracking precision.

On road feel reconstruction, Wu revealed that an algorithm based on a rack-force disturbance observer has achieved an observation accuracy of over 95% in real-vehicle tests. For bumpy roads, the team truncates high-frequency feedback around 10–20 Hz to dampen vibrations that hurt driving comfort while retaining critical road feedback. For scenarios where a tire hits a curb or similar obstacle, a soft-limit algorithm alerts the driver that the wheel cannot turn further.

The team has also developed a calibration method blending subjective and objective metrics. By running standard tests like tire rotation, step inputs, and pulse inputs, they quantified parameters such as self-aligning torque hysteresis and center-region force gradient — reducing reliance on subjective evaluations from test drivers.

In its distributed independent steering research, Wu presented test data showing that on the research platform, the minimum turning radius shrank from roughly 6 meters to 4.89 meters when transitioning from front-wheel-only steering to combined front-and-rear-wheel steering with differential drive. He noted, however, that four-wheel angle coordination and shimmy suppression in the independent steering mechanism remain engineering hurdles for this technical path.

Gasgoo not only offers timely news and profound insight about China auto industry, but also help with business connection and expansion for suppliers and purchasers via multiple channels and methods. Buyer service: buyer-support@gasgoo.com Seller Service: seller-support@gasgoo.com

All Rights Reserved. Do not reproduce, copy and use the editorial content without permission. Contact us: autonews@gasgoo.com

Related Documents(3)

Rankings of smart cockpit component suppliers in China (Jan.-Sept. 2026).7z
China Passenger Vehicle Export Rankings for Jan.-Sept. 2026.7z
Rankings of ADAS component suppliers in China (Jan. - Sept. 2026).7z