Smart Chassis Can No Longer Wait for Every Technology to Mature

Edited by Betty From Gasgoo
Main productsMolds, automation systems
Main productsLithium-ion Battery Separators Dry-process Separators Wet-process Separators Coated Separators

Gasgoo Munich- At new-car launches over the past two years, the chassis has been stepping into the spotlight with growing frequency.

Air suspension, steer-by-wire, fully active suspension — these once-niche engineering terms are turning into headline selling points. Even electromechanical braking (EMB), which only recently crossed the mass-production threshold, has already found its way into vehicles priced around 150,000 yuan.

On the surface, the smart chassis appears to be accelerating into the mainstream.

But line up the actual deployment data, and a stark contrast emerges: some technologies are already locked in battles over cost and scale, others have just cleared the production hurdle, and still others remain largely confined to premium models.

Braking, steering, and suspension each follow their own production timeline — yet automakers have begun developing them in concert.

The smart chassis can no longer wait for every technology to fully mature.

The Chassis Puzzle Pieces Aren't at the Same Stage

Recently, at the 2026 Sixth Automotive AI Smart Chassis Conference, Yu Zhiyao, senior data analyst at Gasgoo Research, revealed a set of chassis configuration data for domestic passenger vehicles.

From January through September 2026, One-Box integrated solutions accounted for roughly 70% of electronic hydraulic braking (EHB) systems. After years of development, EHB competition has long since shifted to system integration and cost control.

Within the same braking domain, EMB tells a very different story.

Between April and September, domestic passenger vehicles saw cumulative EMB installations of 15,160 units — with more than 99% concentrated in a single model: the Li Auto L9 Livis, priced above 500,000 yuan.

Yet in November, GAC Aion's Ray7 brought EMB to the 150,000-yuan segment. The version equipped with Huawei's DriveONE EMB carries an official sticker price of 153,800 yuan.

From flagships above 500,000 yuan to mainstream products around 150,000 yuan, EMB has yet to achieve scale deployment — yet the price gap has already stretched wide. Suppliers are still wrestling with volume production, even as fiercer cost competition looms.

Steer-by-wire is moving even more slowly.

In the first nine months of 2026, the standard-fit penetration rate of steer-by-wire (SBW) in domestic passenger vehicles remained below 1%. The GB 17675-2025 standard, implemented in July, further clarified safety and testing requirements for steer-by-wire systems without mechanical linkage — giving mass-production applications a clearer regulatory foundation.

Regulatory hurdles are gradually clearing, but cost remains stubborn. At the conference, Xu Xinfu, chief engineer for steer-by-wire chassis platforms at Nexteer Automotive's Asia-Pacific division, revealed that SBW still carries a cost premium of roughly 1,000 to 2,000 yuan compared with conventional steering solutions offering redundancy.

"What exactly does that extra one or two thousand yuan buy?" Xu argued that as steer-by-wire pushes into lower-priced segments, cost-performance ratios will become the gating factor for scale adoption.

Suspension systems have seen their price bands widen as well.

Air suspension has pushed into the sub-200,000-yuan market. In the first nine months of 2026, standard-fit air suspension penetration in domestic passenger vehicles reached approximately 10%, with three suppliers — Konghui Technology, Baolong Technology, and Tuopu Group — capturing nearly 90% of the market.

2026年1-9月ADAS供应商装机量排行榜:激光雷达本土供应商前四占比超95%丨盖世汽车研究院

While air suspension fights for mainstream share, fully active suspension still faces higher cost and engineering barriers. According to Gasgoo Research configuration data, fully active suspension saw roughly 50,000 installations during the same period — concentrated in premium models from NIO, Li Auto, and AITO.

From braking to steering to suspension, the smart chassis puzzle pieces are clearly at different stages. Different price points and vehicle segments will continue to feature markedly different hardware. Even vehicles sharing the same platform may be equipped with different braking, steering, and suspension systems, depending on cost targets and product positioning.

If the industry waited for every technology to mature and every cost to fall before pursuing vehicle-level integration, the journey would be long indeed. But the march of automotive intelligence clearly won't follow each component's individual production timeline.

Integration Has Already Begun

The NIO ET9, which began deliveries in 2025, has brought multi-actuator coordination to production vehicles.

The sedan runs on NIO's SkyRide intelligent chassis, integrating steer-by-wire, rear-wheel steering, and fully active suspension. The suspension actively adjusts body posture based on driving conditions, while the steering system coordinates with the vehicle's dynamic requirements. In emergencies such as high-speed tire blowouts, the vehicle deploys corresponding stability control functions.

Drivers may not know what each actuator is doing at any given moment — what they feel is simply a more stable ride and more composed steering. The reason multiple hardware systems can jointly improve driving performance is that they no longer work solely toward their own performance metrics; they must also account for the vehicle's overall dynamic state.

The ET9's hardware configuration remains largely a high-end phenomenon. For most automakers, next-generation actuators have yet to reach scale — yet deeper integration R&D is already underway.

Changan Automobile, for instance, has built and completed a full steer-by-wire chassis integration control prototype along with corresponding platform functions. The system fuses multiple actuator subsystems: four-motor distributed electric drive, EMB, SBW, rear-wheel steering (RWS), and active hydraulic suspension (AHC). What makes this approach noteworthy, as disclosed by Yang Caogang, deputy chief engineer of software architecture at Changan, isn't the number of new components — but that actuators at varying maturity levels have been placed within a single control framework.

Currently, most models still rely on mature systems like EHB and electric power steering (EPS), achieving varying degrees of cross-system control through coordinated drive and braking, yaw control, and suspension adjustment. The addition of next-generation steer-by-wire actuators can further expand the control envelope, offering greater freedom for independent adjustment.

ced57117-2036-4d37-9578-f27075f4b35d.png

AI-generated illustration

Advanced driver assistance is raising the bar for these coordination capabilities even further.

Gasgoo Research projects that by 2030, penetration of L3 and above in domestic passenger vehicles will reach approximately 10%. As autonomous driving systems take on more dynamic driving tasks, vehicles must not only recognize obstacles and plan trajectories — they must also execute driving decisions with precision.

Take high-speed emergency avoidance as an example. While changing direction, the vehicle must simultaneously manage yaw tendencies and body posture. Steering, drive, braking, and suspension each have their own actuation capabilities — but how to allocate control tasks and coordinate intervention timing requires orchestration at the vehicle level.

Traditional vehicle stability control already achieves some cross-system coordination. Now, as electrical and electronic architectures evolve toward centralization, more control functions can be unified at higher levels — opening up greater room for fine-grained, cross-actuator coordination.

Geely's in-development All-Terrain 2.0 system brings AI-powered road surface recognition into chassis control. Yang Zijian, senior chief engineer at Geely Automotive Research Institute's Intelligent Architecture Center, disclosed at the conference that the system fuses chassis sensors with AI models — achieving over 95% accuracy for certain road surface recognition tasks, with response times under one second.

In the past, chassis control primarily relied on wheel speed, steering angle, and yaw rate to assess vehicle state. Now, road surface characteristics can feed into control decisions — giving suspension, drive, and other systems a basis for adjusting strategies in advance.

But earlier detection doesn't automatically mean better control. The real test lies in how multiple actuators work together.

In the same emergency maneuver, the sequence and intensity of braking and steering intervention can produce noticeably different vehicle dynamics. Different systems have their own response characteristics — and developers must also address communication latency, command synchronization, and fault compensation.

If one actuator fails, whether other systems can absorb part of its control load — and how the vehicle maintains a safe state — must be designed in advance. Testing becomes more burdensome as well: a single adjustment to a braking control strategy may ripple through yaw response and suspension behavior, requiring coverage across more actuator combinations and complex scenarios.

How much vehicle dynamics control can ultimately deliver increasingly depends on cross-system development and validation capabilities.

Vehicle Dynamics Control Is Becoming the New Battleground

A braking system, a steering rack, a suspension setup — these can be sourced by spec, performance, and price. Vehicle dynamics control software can be purchased too. But buying software off the shelf doesn't equate to possessing complete vehicle control capability.

Yu Zhiyao noted at the conference that one of the key shifts in software-defined chassis is the gradual decoupling of hardware and software — software can adapt to different hardware platforms and continuously iterate through OTA updates.

Hardware determines what control capabilities a vehicle has; software shapes how those capabilities are deployed. Even after a vehicle rolls off the line, certain steering assist characteristics, brake coordination logic, and suspension control strategies can continue to be refined through software updates.

Software may be cross-platform, but real-world control performance must be honed on specific vehicle models. Control allocation among actuators, coordination strategies under complex conditions, and driving experience calibration all require vehicle-level validation.

Wang Bin, senior expert in IM Motors' vehicle dynamics control division, noted that brake-steer coordination "must work well across all grip conditions." On low-traction surfaces like wet or icy roads, the same commands need to be recalibrated — a process that relies on coordinated control platforms, algorithms, and extensive calibration work.

When new actuators are added, control strategies must be adjusted to match their response characteristics and performance boundaries.

The earlier this development work begins, the more control architectures, software modules, and validation methods can be reused across subsequent models. Even if hardware combinations change in the future, there's no need to rebuild the entire development system from scratch each time.

The smart chassis competition therefore unfolds on two levels.

One is at the actuator level. EMB, SBW, and active suspension still need to clear cost and volume-production hurdles to reach more models.

The other is at the vehicle level. How different hardware is combined, how control strategies are coordinated, and how overall performance is calibrated are becoming competitive capabilities just as critical as the performance of any individual component.

These two levels aren't moving in lockstep. Gasgoo Research forecasts that by 2030, domestic penetration of brake-by-wire will approach 90%, steer-by-wire could exceed 10%, and smart suspension will surpass 40% — with the smart chassis market expected to top 100 billion yuan.

As more actuators enter mass production, the range of chassis hardware combinations across price segments and configurations will only grow richer. Hardware performance and cost remain important — but whether the vehicle can coordinate these capabilities will directly shape the driving experience.

For consumers, these differences may not be visible on a spec sheet. Two vehicles both equipped with air suspension and rear-wheel steering can deliver distinctly different handling and comfort. What determines the experience isn't just the hardware itself — but how it all works together.

Chassis hardware can be upgraded one component at a time. Vehicle dynamics control capability, however, can hardly be built from scratch after every technology has matured.

ActiveSupplier
Location: Canada/Ontario
Main productsMolds, automation systems
SeniorSupplierCompany Insights
Location: China/Guangdong/Shenzhen/Guangming District
Main productsLithium-ion Battery Separators Dry-process Separators Wet-process Separators Coated Separators

Gasgoo not only offers timely news and profound insight about China auto industry, but also help with business connection and expansion for suppliers and purchasers via multiple channels and methods. Buyer service: buyer-support@gasgoo.com Seller Service: seller-support@gasgoo.com

All Rights Reserved. Do not reproduce, copy and use the editorial content without permission. Contact us: autonews@gasgoo.com

Related Documents(3)

Rankings of smart cockpit component suppliers in China (Jan.-Sept. 2026).7z
China Passenger Vehicle Export Rankings for Jan.-Sept. 2026.7z
Rankings of ADAS component suppliers in China (Jan. - Sept. 2026).7z