From Flagship to Standard: Drive-by-Wire Chassis on a "Long Run"

Edited by Betty From Gasgoo
BrandsAUDI, Baojun, Baojun (Diamond), Buick, Cadillac, Chevrolet, IM, Maxus, MG, RISING, Roewe, Skoda, Volkswagen, VW ID, Wuling, Wuling (Global Silver Logo)
BrandsIM

Gasgoo Munich- For drive-by-wire chassis technology, 2026 marks a year of dual breakthroughs in regulation and product development.

With the implementation of the new national standard, the mandatory clause dictating that "the steering wheel must maintain a mechanical connection with the wheels" has been officially removed. Soon after, multiple flagship models rolled out at launches, heavily promoting the technology as a core selling point. On the surface, drive-by-wire chassis appears to be on the eve of mass adoption.

Yet macro data paints a more sobering picture. Industry estimates project steer-by-wire installations to reach roughly 420,000 units in 2026 — a mere 2.2% of total passenger vehicle sales. This gap between high technological visibility and low market penetration captures the true reality of drive-by-wire chassis today.

Behind that 2.2% market share, drive-by-wire chassis remains a technology reserved for flagship models. But for any cutting-edge technology to achieve economies of scale, it must inevitably reach the broader mass market. Crossing from high-end niche to mainstream adoption in the 200,000-yuan segment is the hurdle it must clear.

Regulatory Doors Open, But This Only Solves the "Can It Sell" Question

Mid-year saw the official implementation of the mandatory national standard GB17675-2025, "Basic Requirements for Automotive Steering Systems," which eliminated the previous clause mandating a mechanical connection between the steering wheel and the wheels.

image.png

Image source: Ministry of Industry and Information Technology of China

SAIC Motor led the drafting of this standard, with NIO, China Automotive Technology and Research Center (CATARC), Li Auto, and XPENG among the joint contributors. The new regulation effectively grants steer-by-wire a "mass production permit," bringing it into the compliance framework for standardized manufacturing.

By eliminating the mechanical connection, steer-by-wire removes the physical linkage between the steering wheel and turning wheels. The driver's steering intent is converted by sensors into electrical signals transmitted directly to the actuator motors at the wheels. The most immediate engineering benefit of this structural shift is millisecond-level control precision. Industry research suggests steer-by-wire can achieve control latency of 1 to 10 milliseconds, far outpacing the efficiency of traditional EPS systems that rely on layer-by-layer mechanical transmission.

Beyond precision, the absence of a mechanical linkage brings spatial and safety optimizations. It frees up physical space beneath the cockpit and structurally eliminates the risk of the steering column intruding into the passenger cabin during a frontal collision.

These gains, however, come at the cost of exponentially greater system complexity. To ensure fail-safe operation, the system must rely on dual or even multiple redundancies across power, communication, and execution architectures. Meeting the highest ASIL-D functional safety standard also means suppliers must commit to lengthy validation cycles and steep R&D costs.

A technology being legally cleared for mass installation is a far cry from being commercially viable for mainstream buyers. Bridging that gap requires a long chain of engineering validation, supply chain ramp-ups, and cost digestion.

Costs Trend Downward, But "Industry Cost Readiness" Hasn't Arrived

Looking past the prolonged cost digestion phase, long-term industry expectations remain relatively optimistic.

The Society of Automotive Engineers of China's "Technology Roadmap for Intelligent Chassis of Electric Vehicles" sets a target cost for steer-by-wire at under 4,000 yuan by 2025, dropping to 2,500–3,000 yuan by 2030, when penetration is expected to hit 30%. Industry forecasts point to a market worth hundreds of billions — by 2030, China's intelligent chassis market will reach 107.86 billion yuan, with steer-by-wire accounting for 22.91 billion yuan as penetration climbs from 5% to 30%. From a long-cycle perspective, the downward trajectory of costs seems indisputable.

Yet there's a catch: "costs are falling" and "costs have fallen enough to make it standard across a 250,000-yuan model lineup" are two very different things.

According to authoritative industry data, the current steer-by-wire supply chain is highly consolidated. In 2025, Bosch, ZF, and Nexteer accounted for a combined 57% of the global SBW market, with Bosch leading at roughly 22.8%. Among Chinese-backed suppliers, Nexteer is currently the only Tier 1 to achieve scaled SBW production, standing alongside Bosch and ZF as the world's only three suppliers with mass-production capabilities. Its Chinese market share is projected to sit around 35% in 2026.

Industry analyses explicitly note that domestic substitution for SBW is progressing slower than expected, and Nexteer's oligopoly will likely persist until 2030. Among local suppliers, Zhejiang Shibao's first SBW mass-production project is slated to land in the second half of 2026, while Bethel Automotive Safety Systems is pursuing a path of "EMB first, SBW to follow."

Overall, the domestic camp is still climbing the curve from securing contracts to mass production, with the substitution window in steering proving narrower and slower than in braking.

image.png

Image source: IM Motors

Still, the market in 2026 has indeed seen models offering a full drive-by-wire chassis as standard across a 250,000-yuan lineup — the IM Motors series, for instance. According to IM Motors CTO Xiang Jiao, the brand managed to bring products equipped with drive-by-wire chassis down to the 200,000-to-250,000-yuan range, primarily "thanks to the company's proprietary industrial system that helps drive down costs."

That explanation holds up. It precisely illustrates that current standard-fit strategies are essentially localized breakthroughs by automakers leveraging their own supply chains, rather than a sign that industry-wide supply chain costs and capacities have fallen into place.

The 250,000-Yuan Family SUV: The Litmus Test for the "Last Mile"

If one were to pinpoint the most telling observation window for the mainstreaming of drive-by-wire chassis, the 250,000-yuan family SUV segment might be the most demanding. The reason lies in the decision-making structure of buyers in this price bracket.

Buyers in this tier aren't early adopters willing to pay a premium for an "invisible technology." Their judgment of value is highly holistic: space, range, safety, brand, and running costs — a shortfall in any single category is enough to derail a purchase. For a technology to earn a default spot on the spec sheet for this demographic, it must simultaneously pass two tests: perceived value and cost tolerance.

The current reality is that in the core price band of 250,000-yuan family SUVs, the absence of steer-by-wire in entry-level trims remains the norm. Across mainstream models like the Li Auto L6 and AITO M7, the feature is mostly restricted to top-tier trims, offered as an option, or not available at all.

汽车线控底盘横板图.jpeg

Image source: Generated by Doubao

In this context, a model that makes a full drive-by-wire chassis standard across a 250,000-yuan lineup holds value beyond its individual competitiveness — it shifts the technology's "default status" on the spec sheet. Drive-by-wire chassis is no longer a premium driver for high-end trims but a baseline feature for every vehicle rolling off the line. Jiao Qiao, Senior Director of Brand Users at IM Motors, encapsulated the strategy as offering "a competitor's Series 6 price, with Series 8 and Series 9 flagship configurations."

For consumers, however, whether a "standard across the board" strategy actually works won't depend on launch-day rhetoric. It hinges on whether dealerships can translate a spec sheet checkbox into tangible driving value.

After Standardization, What's Still Missing for Mass Adoption?

Making it standard puts the technology within reach, but it doesn't automatically translate into purchase intent, nor does it resolve the practical barriers to industry-wide adoption.

汽车线控底盘横板图 (1).jpeg

Image source: Generated by Doubao

Unlike range, screen size, or seat functions, drive-by-wire chassis can't be statically "seen" in a showroom. A traditional steering system requires over 470 degrees of rotation to go lock-to-lock; steer-by-wire paired with rear-wheel steering can compress that to 180–240 degrees. A 5-meter SUV can achieve a turning radius of 4.85 meters — approaching that of a compact car. For this paper-spec difference, Xiang Jiao used the phrases "once you try it, you can't go back" and "it drives like a Polo" to describe the real-world experience.

Yet translating spec gaps into purchase intent requires users to actually sit in the driver's seat and feel the difference — whether making a U-turn in a tight underground garage or navigating narrow city streets.

For family buyers who prioritize space, range, and ownership costs, whether they even put "chassis" on their test-drive checklist before entering a showroom tests channel reach and user education. This is clearly a systemic issue that no single car's product prowess can resolve.

Taking a step back, even if users are willing to test drive, drive-by-wire chassis still faces a "trust barrier." Its safety narrative takes time to build, and the speed at which family buyers psychologically accept the removal of mechanical backups may not sync with the pace of regulatory and cost advancements.

Drawing an analogy to aviation, fly-by-wire flight controls are already ubiquitous. But their public acceptance was built over decades of accident data, redundant standard iterations, and accumulated trust. For automotive steer-by-wire to complete the same trust-building process, it requires a massive volume of real-world driving mileage and failure case data.

Xiang Jiao previously noted that IM Motors' drive-by-wire chassis complies with the ISO 26262 functional safety standard, having passed over 11,400 system-level tests. It employs triple redundancy — with different routing, processing logic, and implementation methods — to prevent a single failure mechanism from compromising all backups. This high-standard engineering investment forms the technology's safety baseline. Still, dispelling public anxiety around a new technology requires more than just rigorous internal testing by automakers; it demands a sufficiently large market base to slowly build trust.

image.png

Image source: Ministry of Industry and Information Technology of China

Furthermore, regulatory progress in L3 autonomous driving is providing another demand logic for drive-by-wire chassis. The mandatory national standard GB 44721-2026, "Safety Requirements for Autonomous Driving Systems of Intelligent Connected Vehicles," has been published and will take effect on July 1, 2027. Industry consensus holds that this will transition steer-by-wire and redundant braking from "optional" to "essential."

When activated within its ODD, L3 shifts driving responsibilities to the system. This transfer of liability forces the vehicle to establish multiple redundancies at the execution layer, with steer-by-wire serving as a prerequisite for steering execution redundancy and system decoupling.

This means the long-term demand for drive-by-wire chassis stems not just from the consumer desire for a "better driving" experience, but also from regulatory mandates for advanced autonomous driving hardware architectures.

For the 250,000-yuan family SUV market, however, L3 penetration remains in its infancy in 2026. In other words, while regulations have established drive-by-wire chassis as a long-term necessity for advanced autonomous driving, the commercial rollout of L3 technology at scale will still take time.

Conclusion:

In 2026, drive-by-wire chassis officially knocked on the door of the 250,000-yuan mainstream market. Yet behind the dense industry buzz, the technology still has numerous practical conditions to fulfill before achieving true mass adoption.

In recent years, competition in the family SUV market has largely centered on visible comfort features like screens and seats. The downward push of drive-by-wire chassis into mainstream price segments represents a "return to value" — a shift toward underlying mechanical quality and safety redundancy. This tests not only automakers' systemic cost-reduction capabilities but also the mainstream consumer base: are they ready to pay for invisible "implicit safety" and driving dynamics?

Clearly, this isn't a goal easily achieved in the short term. From regulatory loosening and supply chain cost reduction to shifting consumer mindsets, the drive-by-wire chassis's journey across the "last mile" is no longer a contest of spec-sheet parameters. It is a test of endurance and systemic strength across the entire industry chain.

SAIC MotorAutomakerCompany Insights
Location: China/Shanghai/Shanghai/Pudong New Area
BrandsAUDI, Baojun, Baojun (Diamond), Buick, Cadillac, Chevrolet, IM, Maxus, MG, RISING, Roewe, Skoda, Volkswagen, VW ID, Wuling, Wuling (Global Silver Logo)
ModelsMidsize SUV, Compact SUV, Compact SUV, Midsize SUV, i6/i6 MAX, LS8, HS/Pilot, Electra E5, Enclave, Fullsize SUV, Encore, Encore GX/Encore Plus, Envision, Excelle, Excelle GT, GL6, GL8, GL8 ES/ Avenir, Century, Lacrosse, Electra E4, Regal, Velite 6, Velite 7, Verano, Envista, Large EV Car, OPTIQ, CT4, CT5, CT6, Large EV SUV, LYRIQ, GT4, XT4, XT5, XT6, Fullsize SUV, Blazer, Cavalier, Seeker, Equinox, Malibu XL, Menlo, Fullsize EV SUV, Monza, Orlando, Sail 3, Tracker, Trailblazer, Chevrolet, D60, D90, Lingdi, G70, G90, G10, G20, G50, L7, L6, LS6, LS9, LS7, i6/i6 MAX, iMAX8, MARVEL R, MG4, Compact Car, RC7, R7, F7, Compact Car, Midsize SUV, MG7, Cyberster, MG ONE, MG3, MG5, MG6, ZS, Clever, D5X, D7, D6, i5, Ei5, RX3, Lomemo, RX5 MAX, RX5/RX5 PLUS, RX8, RX9, Whale, 510, 530, 630, 730, E100, E200, E300, RC-5, RS-3, RS-5, RS-7, Valli, Yangguang, Hongguang MINIEV, Hongguang PLUS, Hongguang S, Hongguang S3, Hongguang V, Rongguang, Sunshine, Zhengcheng, Jiachen, Hongguang MINIEV, Nano, Xingguang s, Air ev, Binguo, Yep, Yun Duo, Medium-sized pure electric sedan, Midsize SUV BEV, Yunhai, Large SUV, Huajing S, Xingyun, Xingguang, Xingchi, Victory, Asta, Spark, Aveo, Kamiq/Kamiq GT, Karoq, Kodiaq, Octavia, Rapid, Superb, A7L, Midsize SUV, Q6 E-tron, Q5 e-tron, A5, Q6, Lamando, Lavida, Lavida XR, Passat, Phideon, Polo, Santana, T-Cross, Teramont, Teramont X, Tharu, Tiguan L, Tiguan X, Touran L, Viloran, ID.7 S, ID.3, Guanghe 4 X, ID.6 X, Excelle GX, XTS, Cruze, Malibu, Feifan R, GS, MARVEL X, 360, Whale, 310, 560, 310W, 360, RC-6, RM-5, Yangguang, e-Lavida, Touran, GL8 ES/ Avenir, Velite 7View more
IM MotorsAutomaker
Location: China/Shanghai/Shanghai/Pudong New Area
BrandsIM

Gasgoo not only offers timely news and profound insight about China auto industry, but also help with business connection and expansion for suppliers and purchasers via multiple channels and methods. Buyer service: buyer-support@gasgoo.com Seller Service: seller-support@gasgoo.com

All Rights Reserved. Do not reproduce, copy and use the editorial content without permission. Contact us: autonews@gasgoo.com

Related Documents(3)

Rankings of smart cockpit component suppliers in China (Jan.-Sept. 2026).7z
China Passenger Vehicle Export Rankings for Jan.-Sept. 2026.7z
Rankings of ADAS component suppliers in China (Jan. - Sept. 2026).7z